Design & Reuse
arrow A/D Converter (ADC) (519)
arrow Amplifier (103)
arrow Analog Comparator (16)
arrow Analog Filter (27)
arrow Analog Front Ends (37)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (5)
arrow Clock Synthesizer (90)
arrow D/A Converter (DAC) (213)
arrow DC-DC Converter (99)
arrow DLL (743)
arrow Oscillator (337)
arrow Oversampling Modulator (8)
arrow PLL (1737)
arrow Power Management (915)
arrow RF Modules (91)
arrow Sensor (62)
arrow Sensors and Monitors (88)
arrow Temperature Sensor (135)
arrow Other (266)
915 IP
651
0.118
Power on Reset IP, Input: 2.5V, UMC 0.25um MS process
Power on Reset circuit tolerant with 0.25um, 2.5V MMC and Logic process VCC=2.5V, B type IO, Power On Reset, UMC 0.25um Logic process....
652
0.118
Power on Reset IP, Input: 2.5V, UMC 40nm LP process
2.5V Power On Reset, Vrr=1.90 without Vfr, UMC 40nm LP/RVT Low-K Logic process....
653
0.118
Power on Reset IP, Input: 2.5V, UMC 40nm LP process
Vrr=2.0V Vfr=1.9V, VCC3I=2.5V, 2.5V Power On Reset, special request, UMC 40nm LP/RVT Low-K Logic process....
654
0.118
Power on Reset IP, Input: 2.5V/3.3V, HJTC 0.18um eFlash/G2 process
Vrr=2V Vfr=1.95V, input VCCK=1.8V VCC3IO=3.3V, 3.3V Power On Reset, special request by Hisilicon, HJTC 0.18um 2P6M eFlash process....
655
0.118
Power on Reset IP, Input: 3.3V, UMC 0.11um eFlash process
Vrr=2.2V, Vfr=2.0V, A type IO, 3.3V Power On Reset, UMC 0.11um AL eFlash process....
656
0.118
Power on Reset IP, Input: 3.3V, UMC 0.11um HS/AE process
Vrr=2.2V Vfr=2.0V, B type IO, input VCCK=1.2V VCC3IO=3.3V, 3.3V Power On Reset, UMC 0.11um HS/AE (AL Advanced Enhancement) Logic process....
657
0.118
Power on Reset IP, Input: 3.3V, UMC 0.11um HS/AE process
Vrr=2.2V, Vfr=2.0V, A type IO, 3.3V Power On Reset, UMC 0.11um HS/AE (AL Advanced Enhancement) Logic process....
658
0.118
Power on Reset IP, Input: 3.3V, UMC 0.11um HS/AE process
Vrr=2.2V, Vfr=2.0V, A type IO, 3.3V Power On Reset, UMC 0.11um HS/AE (AL Advanced Enhancement) Logic process....
659
0.118
Power on Reset IP, Input: 3.3V, UMC 0.11um HS/AE process
Vrr=2.2V, Vfr=2.0V, B type IO, 3.3V Power On Reset, UMC 0.11um HS/AE (AL Advanced Enhancement) Logic process....
660
0.118
Power on Reset IP, Input: 3.3V, UMC 0.13um HS/FSG process
UMC 0.13um HS Logic process, Vrr=2.2V, without Vfr, A type IO, 3.3V Power On Reset....
661
0.118
Power on Reset IP, Input: 3.3V, UMC 0.13um HS/FSG process
0.13um HS process, 3.3V device vcc3I, Vrr=2.2V, Vfr=2V, Ivcc=13mA, Power On Reset, UMC 0.13um HS/FSG Logic process....
662
0.118
Power on Reset IP, Input: 3.3V, UMC 0.35um process
Vrr=2.5V Vfr=2.3V, VCC=3.3V, Ivcc=18uA, Power On Reset, UMC 0.35um Logic process....
663
0.118
Power on Reset IP, Input: 3.3V, UMC 0.5um process
Vrr=2.3V without Vfr, VCC=3.3V, Ivcc=17uA, B type IO, Power On Reset, UMC 0.5um Logic process....
664
0.118
Power on Reset IP, Input: 3.3V, UMC 0.5um process
Vrr=2.3V without Vfr, VCC=3.3V, Ivcc=17uA, L type IO, Power On Reset, UMC 0.5um Logic process low voltage....
665
0.118
Power on Reset IP, Input: 3.3V, UMC 90nm SP process
Vrr=Vfr=2V, input VCC3IO=3.3V, 3.3V RTC Power On Reset, special request by MTD, UMC 90nm SP/RVT Low-K Logic process....
666
0.118
Power on Reset IP, Input: 3.3V, Vrr=2.81V, Vfr=2.81V, UMC 55nm SP process
Vrr=2.81V Vfr=2.81V, input VCCK=1.0V VCC3IO=3.3V, 3.3V Power On Reset,special request, UMC 55nm SP/RVT LowK Logic Process...
667
0.118
Power on Reset IP, Input: 5V, UMC 0.5um process
Vrr=3.4V Vfr=3.0V, VCC=5V, Ivcc=17uA, B type IO, Power On Reset, UMC 0.5um Logic process....
668
0.118
Power on Reset IP, UMC 0.11um eFlash process
Power on reset(POR) block, UMC 0.11um e-flash process....
669
0.118
Power on Reset IP, UMC 0.11um HS/FSG process
Power on reset(POR) block, UMC 0.11um HS/copper Logic process....
670
0.118
Power on Reset IP, UMC 0.162um eHV process
Power on reset(POR) block, UMC 0.162um eHV process....
671
0.118
Power on Reset IP, UMC 0.25um process
Power on reset using 0.25um process, A-type IO, Urr=1.8V, Ufr=1.6V, UMC 0.25um Logic process....
672
0.118
Power on Reset IP, UMC 0.25um process
Power on Reset with Vrr and Vfr., Power On Reset, UMC 0.25um Logic process....
673
0.118
Power on Reset IP, UMC 0.25um process
Power on Reset with Vrr and Vfr., Power On Reset, UMC 0.25um Logic process....
674
0.118
Power on Reset IP, UMC 0.25um MS process
Vrr=1.6V Vfr=1.4V, core type, Power On Reset with tunable reset time by external capacitor, UMC 0.25um Logic/MMC process....
675
0.118
Power on Reset IP, Vrr: 0.85V, Vfr: 0.75V, UMC 90nm LL process
Power On Reset (POR), UMC 90nm LL Logic process, RVT, Core type, Vrr=0.85V Vfr=0.75V....
676
0.118
Power on Reset IP, Vrr: 1.2V, Vfr: 1.0V, UMC 0.18um LL process
Vrr=1.2V, Vfr=1.1V, corner type, Power on Reset, UMC 0.18um LL process....
677
0.118
Power on Reset IP, Vrr: 1.2V, Vfr: 1.1V, UMC 0.18um LL process
Vrr=1.2V, Vfr=1.1V, corner type, Power on Reset, UMC 0.18um LL process....
678
0.118
Power Switch IP, 2 inputs, HJTC 0.18um eFlash/G2 process
2 Input Power Switch, HJTC 0.18um eFlash process....
679
0.118
5V to 3.3V/1.8V with 80mA/40mA driving capability, Linear Regulator; UMC 0.162um GII process._x005F_x005F_x005F_x000D_
5V to 3.3V/1.8V with 80mA/40mA driving capability, Linear Regulator; UMC 0.162um GII process....
680
0.0
1 mA LDO voltage regulator (output voltage 0.4V…0.9V)
040TSMC_LDO_01 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO receives the input ...
681
0.0
5 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_01 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO inputs voltage VDD_...
682
0.0
2 mA LDO voltage regulator (output voltage 1.2 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
683
0.0
2 to 100 MHz power amplifier with attenuator
065TSMC_PA_02 consists of attenuator, 1-stage amplifier with tunable gain. Attenuator reduces output power by 1dB from 0 to 60 dB. The amplifier gain ...
684
0.0
5-60V Input Buck Regulator (Type-C EPR compatible)
The OT1152 is an 80mA CMOS buck regulator designed for use with high input voltages and logic level output voltages.. This implementation takes a 4...
685
0.0
1.12V/10uA, 20uA, 30uA, 50uA, 100uA Reference current and voltage source with temperature sensor
065TSMC_RS_03 is a reference current and voltage source (RS), used to supply analog blocks. It is based on bandgap reference voltage source, forming t...
686
0.0
1.16 V Bandgap voltage reference
180TSMC_BVR_01 a bandgap voltage reference produces temperature independent voltage level around 1.16V (at Bangap_Vref pin) using temperature dependen...
687
0.0
1.17 V Reference current and voltage source
Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...
688
0.0
1.18 V/ 1.02...5.1 uA Reference current and voltage source
Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...
689
0.0
1.19 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
690
0.0
1.19 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
691
0.0
1.2 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...
692
0.0
1.2 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...
693
0.0
1.22 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
694
0.0
1.22V/1uA Reference voltage and current source
180XFAB_RS_01 consists of a bandgap reference voltage regulator, formed temperature and power supply variations independent voltage and bias, formed r...
695
0.0
4.25V...15V to 3.3V/120mA LDO
4.25V...15V to 3.3V/120mA LDO...
696
0.0
1.2V->0.8V Low/Ultra-low Power LDO Comparator IP Core
A 1.2V->0.8V Low/Ultra-low Power LDO Comparator (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts...
697
0.0
4.2V->3.3V Low/Ultra-low Power LDO IP Core
A 4.2V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 4.2-volt in...
698
0.0
3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO IP Core
A 3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts...
699
0.0
3.3V ->1.1V/0.9V Cap-less LDO IP Core
A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...
700
0.0
3.3V- >1.2/1.1V/0.9V Ultra-low Power LDO IP Core
A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...